IMG_1409.JPG
Looking toward the feed box, no module on the stand.
IMG_1410.JPG
RF system, waveguides capped.
IMG_1411.JPG
Looking into feedbox
IMG_1412.JPG
Feedbox
IMG_1413.JPG
Feedbox
IMG_1414.JPG
Turnaround box
IMG_1415.JPG
Turnaround box
IMG_1416.JPG
Turnaround box support structure (large forces with vacuum loads)
IMG_1417.JPG
Turnaround box support structure
IMG_1418.JPG
Turnaround box in foreground, feedbox at other end of test facility. Shielding roof is off.
IMG_1419.JPG
Turnaround box
IMG_1420.JPG
Turnaround box
IMG_1421.JPG
Module 5 in Halle 3
IMG_1422.JPG
Module 5 in Halle 3
IMG_1423.JPG
Module 5 in Halle 3
IMG_1424.JPG
Module 5 in Halle 3
IMG_1425.JPG
Module 5 in Halle 3
IMG_1426.JPG
Module 5 in Halle 3
IMG_1427.JPG
Module 5 in Halle 3
IMG_1428.JPG
Module 5 in Halle 3
IMG_1429.JPG
Module 5 in Halle 3. Quad end.
IMG_1430.JPG
Module 5 in Halle 3. Quad end.
IMG_1431.JPG
TTF/Flash linac with module out.
IMG_1432.JPG
TTF/Flash linac with module out.
IMG_1433.JPG
TTF/Flash linac warm bypass
IMG_1434.JPG
TTF/Flash linac warm bypass
IMG_1435.JPG
TTF/Flash linac portable "clean room" at interconnect
IMG_1436.JPG
TTF/Flash linac warm bypass
IMG_1437.JPG
TTF/Flash linac end of warm bypass. Note: pumping line diameter is greatly reduced from 300 mm in this bypass.
IMG_1438.JPG
TTF/Flash linac end of warm bypass. Beam tube.